What building automation services does Cobler provide in Malaysia?

Cobler provides building management system integration, controls engineering, and implementation services to improve visibility, efficiency, and reliability.

Can Cobler integrate with existing BMS infrastructure?

Yes. Cobler supports integration and modernization for mixed-vendor and legacy environments, helping teams extend value from current infrastructure.

How do automation services support smart building goals?

Automation services connect systems, standardize data flows, and enable centralized control so facilities teams can optimize performance continuously.

Do you provide ongoing support after deployment?

Yes. Cobler supports continuous monitoring and optimization so automation systems continue to deliver measurable performance over time.

Building automation · BMS, PLC and SCADA

Smart buildings start here.

We design, install, program and look after the controls that run your chillers, air handling units, pumps and power, from a new BMS to bringing an ageing, mixed-brand system back under one roof.

How a project runs

Riso illustration of engineers commissioning a plant room: a control panel, a BMS workstation, a chiller, pumps and an air handling unit

Trusted by

What we do

From the first drawing to years after handover

One team for design, installation, programming and support, across controls, ACMV and energy.

Riso illustration of an engineer drawing a building control schematic

Design and integrate

BMS design and integration tailored to how your building actually runs. We bring mixed-brand and legacy systems together over open protocols like BACnet and Modbus.

BMS design and integration
PLC and SCADA integration
Legacy and mixed-brand modernisation

Riso illustration of technicians installing a control panel and running cables to an air handling unit

Install and program

Panels, controllers, sensors and wiring installed with minimal disruption, then programmed and commissioned so every sequence does what the design says.

Hardware installation
Automation programming
Testing and commissioning

Riso illustration of a support engineer watching plant screens at a desk

Support and improve

Maintenance, fixes and tuning after handover, plus energy-saving strategies, so the system keeps performing instead of drifting back to defaults.

Maintenance and support
Remote monitoring
Energy management

How a project runs

Assess, design, build, tune

Assess
We survey the site and your existing systems, and agree what the building needs to do.
Design
A system design and implementation roadmap tailored to your plant, points and budget.
Build
Installation and configuration of the BMS, with minimal disruption to your operations.
Tune
Testing, fine-tuning and ongoing checks so the system keeps running efficiently after handover.

Why Cobler

Engineers who stay after handover

A certified team: Certified professionals with decades of combined experience in building automation.
Secure by design: Network segmentation and OT/IT isolation that keep building control systems protected.
One point of contact: The same team from design through commissioning, and support that stays after handover.

Partners

The equipment and platforms we build with

Case studies

Success Stories

Real results from buildings and plants across Malaysia and the region.

EPF headquarters building served by its district cooling plant in Kuala Lumpur

Commercial

EPF HQ District Cooling: BMS Control to 0.7 kW/RT

Cobler delivered the BMS, on an MRCB-led project, for the district cooling plant that cools EPF HQ, Malaysia's largest fund manager, tuning the chilled water plant to 0.7 kW/RT efficiency.

EPF HQ District Cooling PlantRead

Hospitality

Marriott Hotel: ACMV Retrofit with VSDs and a Centralized BMS

Cobler retrofitted a Marriott hotel's ACMV. New variable speed drives cut maximum demand by about 3.2% and energy by about 4.9%, a broken BMS was centralized, and weak cooling was traced to a duct leak and over-designed air handling.

Marriott HotelRead

View all case studies

Then run it with CobiNeural

The controls run the building. CobiNeural tells you how well.

Our platform reads the systems we build, lets you set up detectors that catch problems early, and measures what each fix saves, with an AI assistant helping at every step.

Meet CobiNeural

FAQ

Frequently asked questions

Tell us about your plant room.

Share your BMS point list, drawings or a few photos, and we will tell you what we would fix, upgrade or connect first. Free, and no obligation.

or email admin@cobler.io · +603 8940 5757