CobiNeural · Smart Operation Platform

Run every facility from one screen.

CobiNeural reads the BMS, PLC, SCADA and meters you already have, or runs on its own. Build detectors that catch problems before they cost you, set alerts for the right people, and measure exactly what each fix saved, with a built-in AI assistant helping at every step.

Riso illustration of a facility manager at a wall dashboard, with data lines coming from the chiller, pumps, cooling tower, switchboard and offices of a building

Trusted by

  • CapitaLand logo
  • Mid Valley logo
  • YTL Group logo
  • MRCB logo
  • Mosca Malaysia logo
  • Great Eastern logo
  • Equalbase logo

See it for real

CobiNeural in 80 seconds

A short walkthrough of real-time monitoring, alerts, and operational, EECA and ISO 50001 reports.

What it watches

Energy, air, water and chilled water, in one place

The four areas that decide cost and comfort, collected on one platform over the systems you already run, and turned into alerts your team can act on.

Riso illustration of an electricity meter and switchboard under a demand curve with one peak

Energy

Consumption and maximum demand at 30-minute resolution, tied back to the equipment behind each peak, so demand is managed instead of absorbed on the TNB bill.

Riso illustration of an office with an air sensor on the wall and fresh air from a ceiling vent

Indoor air

Temperature, humidity and CO2 measured continuously across zones, with alerts the moment conditions drift toward the range where people or stored goods are at risk.

Riso illustration of a water meter with a small leak at night

Water

Site and equipment-level water use, so abnormal consumption and silent leaks surface early instead of arriving as a surprise on a quarterly statement.

Riso illustration of a chiller, two pumps and a cooling tower connected by pipes

Chilled-water plant

Plant efficiency held live in kW/RT, so chillers, pumps and cooling towers run to the actual load rather than flat out, the largest energy lever in most buildings.

How it works

From a reading to a proven saving

One workflow, with CobiBot, the built-in AI assistant, helping at every step.

Riso illustration of a control panel, meters and a sensor plugged into one gateway

Connect

CobiNeural reads your BMS, PLC and SCADA points and your power, water and BTU meters over BACnet, Modbus and more. Where a site has no system, it runs on its own sensors.

Example conversation

What is connected at Tower A?

CobiBot: The BMS over BACnet, 18 power meters, 4 water meters and 2 BTU meters. Chiller 3’s meter has not reported since Monday.

Need the controls built or upgraded first? That is our building automation team.

Reports and compliance

The paperwork, from the same data

Compliance and management reports come out of the readings CobiNeural already collects, instead of a spreadsheet at the end of each quarter.

Operations reports
Daily, weekly and monthly summaries of energy, comfort and equipment for your team and management, from the same data as everything else.
EECA
A unified view across buildings and systems, with consistent monitoring and records that make an EECA review faster.
ISO 50001
Baselines, targets and monitoring routines structured for the continuous-improvement cycle the standard asks for.
Measurement and verification
Before-and-after tracking against a baseline, so each energy project shows what it really saved.
ESG and custom reports
Sustainability reports and tailored reports on the metrics your management asks for, generated from the same data.
What EECA asks of your building

FAQ

Frequently asked questions

See your own site in CobiNeural.

Share a meter export or a BMS point list and we will show you what CobiNeural would surface first, on your data.

or email admin@cobler.io · +603 8940 5757